More front end downforce with less drag than the M3 stock bumper configuration. Producing 174lbs of downforce at 150mph with a 5 horse power reduction in drag over the stock BMW configuration. That's like gaining 5 horse power from your engine! Our front splitter extends 3 inches forward of the front bumper and back past the radiator, this creates suction and pulls the air out of the engine compartment, increasing downforce and top speed while reducing engine temps. Made from heavy duty poly plastic, the splitter also protects the front underside of the car from debris. With the 4 aluminum hex stanchions on the leading edge, the splitter angle can be adjusted to change downforce to suit track conditions.
SneedSpeed splitters now carry a full 100% replacement for life with the original purchaser. If you somehow break a SneedSpeed splitter send us the pieces you have and we'll send you another one FREE!! This is only for the splitter and doesn't include hardware or stanchions.
- Fully adjustable for aero tuning and track conditions
- The splitter extends approximately 3 inches in front of the bumper and to the outside edges of the front tires
- Extends rearward to front sway bar
- Kit comes with all the hardware needed for installation.