R56 Brake Cooler Install Instructions

R56 Brake Cooler Install Instructions

Lift car and support

Remove fog lights and brackets, zip tie wiring up

Install brake cooler brackets, trim any plastic tabs that prevent bracket from mounting flush

Install metal brake hose connector between transmission and subframe on driver’s side

Remove front wheels, brake calipers, rotors and backing plates

Install brake cooler wheel bracket in place of brake backing plate and reinstall caliper and rotor

Install hose clamps on to brake cooler hose

Route brake cooler hose from bumper bracket to wheel bracket on passenger side

Zip tie hose away from moving parts, including wheel and axle

Route brake cooler hose to metal connector and from metal connector to wheel bracket

Zip tie hose away from moving parts, including wheel and axle

Reinstall wheel and roll car back and forth

Turn wheels to full lock in each direction and check for heavy contact between tire and brake hose or inner fender

Adjust zip ties and trim plastic as need to make brake hose and inner fender clear tire and wheel

Test drive and recheck clearance